Middle Position IECEx 30S/100Nm Explosion Proof Electric Actuator

DCL-Ex05 dimension and parameters.pdf

DCL-Ex10 Ex20 dimension and parameters.pdf

Explosion proof electric actuator with middle position / passive contact

Features

• Less than 100° operation with mechanical limits
• Middle position can be added per required angle
• Two auxiliary micro switches to feedback full open and full close position
• Self-locking at any position when lose power, no additional brake needed
• Fully enclosed squirrel-cage asynchronous induction motor with heavy duty
• Rugged IP68 and type 4X aluminum alloy enclosure with powder coated
• All steel alloy spur gear and bronze alloy worm gear with permanent lubricated
• Tempered glass covered visual position indicator
• Standard ISO5211 multi flange mounting

Description

DCL explosion proof electric actuators are widely used for chemical, power plant, winery, oil & gas and petroleum etc. Actuator uses cylinder stop type flameproof surface with very high precise machining. The connection part between body and covers are complied to ATEX, IECEx, UL and CSA standard required length and gap. ExdIICT4 grade for ATEX, IECEx and Zone system, Group C, D T4 for Division system used in USA.

Middle position is optional for that valve need to be stopped in 3 specific positions. Two dry contact feedback for full open and full close position. Actuator can be installed 360° any angle on the pipe or other devices. Valve stays at last known position when actuator’s power lose. Dehumidify heater is optional to protect actuator against condensation.

Specification:

​